9.3.9. Dismantling and assembly of valvate assembly of AT
Dismantling
Design of valvate assembly of AT
|
|
|
1 — the gear shifting Valve
7 — the Blocking K1 valve
9 — Perepuskna the valve without opening (white)
13 — the Reed returnable valve with an opening
14 — Balls
14a — pressure Valve
24 — the Returnable valve of the secondary pump
33a — the Screen of the valve of switching B2
35 — Pruzhina |
46 — the Valve of management of pressure
54 — Perepuskna the valve
81 — the Filter
86 — the Drain LB3 valve
87 — the Throttle K2 valve
A — the Case of valves
A1 — the gear shifting Valve
B — the damper Case |
Removal of the case of a damper (V) with an intermediate plate
|
|
|
4 — the Intermediate plate
A — the Case of valves
B — the damper Case |
|
Design of valvate assembly of AT
|
|
|
1 — the gear shifting Valve
3 — the Piston of the operating valve 2-3
4 — the Operating valve 2-3
5 — the Adjusting valve of adaptability of the converter of rotation
7 — the Blocking K1 valve
10 — the Valve of switching B1
11 — the Piston of the operating valve 3-4
12 — the Operating valve 3-4
16 — the Adjusting valve of the main pressure
17 — the Valve of management 1-2
18 — Plugs of the operating valve 1-2
19 — the Piston of the operating valve 1-2
26 — the Adjusting valve of working pressure |
27 — the Stopper
32 — the Adjusting valve of pressure at full opening of a butterfly valve
33 — the Valve of switching B2
35 — the Finger of switching of pressure of lubricant
38 — the Adjusting B1 valve
39 — the Piston of the adjusting valve 81
40 — the Valve of inclusion of the lowering transfer (kick-down)
41 — the Valve of switching of the regulator of pressure
44 — the Vacuum valve of the regulator of pressure
45 — the Adjusting valve of the regulator of pressure
46 — the Piston of the adjusting valve of the regulator of pressure |
Design of valvate assembly of AT
|
|
|
25 — the Reducing valve
47 — the Adjusting valve of pressure of switching
48 — K1 Damper
49 — K2 Damper
50 — the Adjusting valve of a damper K1
51 — the Adjusting valve of a damper K2
52 — B1 Damper
53 — the Including damper
55 — the Blocking DV2 valve
56 — the switching Valve when braking by the engine
|
57 — the Adjusting B1 valve
58 — the Adjusting valve of the including damper
59 — the Valve of switching K2
60 — the B2 Safety valve
61 — the Blocking valve of a brake of switching
62 — the Blocking RV1 valve
63 — the Damper of the lowering transfer (kick-down)
64 — the Valve of adjustment of pressure of lubricant
85 — the Valve of restriction of pressure |
|
|
|
1. Turn off bolts.
2. Remove valves (13), (24), (86) and the screen (33a).
3. Fix the case of valves (A) and the case of a damper (V) together and turn them.
4. Carefully lift the case of a damper (V) with an intermediate plate.
5. Remove all 19 balls (14).
6. Remove the valves filtering and switching fingers.
7. Turn off a side cover from the case of valves.
8. Adjust pressure at full opening of a butterfly valve. |
|
Assembly
Assembly is carried out as it should be, the return to dismantling. Tighten bolts of fastening (arrow) so that both parts of the case could not move relatively each other.
