9.3.6. Removal and installation of a forward cover with the secondary pump
Removal
Details of installation of a forward cover with the secondary pump
|
|
|
1. Turn off bolts (18).
2. Remove a forward cover (10), having turned off two bolts (18) (arrow). |
|
Dismantling
Details of installation of a forward cover with the secondary pump
|
|
|
1 — the Cover of the case of pump assembly
2 — the Persistent washer
3, 4 — pump Gear wheels
6 — the Epiploon
7 — the Sealing ring
10 — the Forward cover of the transmission
12 — the LB3 Piston
13 — the Spring plug |
14 — the Returnable spring
15 — the Lock ring
16, 17 — epiploon Rings
19 — Laying
20 — the Roller bearing
21, 22 — Teflon rings
23 — the Bolt |
|
|
1. Remove the LB3 (12) piston.
2. Turn off bolts (23) and uncover about the forward (10) case of the secondary pump (1) with an intermediate plate (2).
3. Remove an intermediate plate. |
| 4. Remove a radial epiploon (6) and replace it. If the roller bearing (20) is damaged, the secondary pump has to be replaced. |
|
| 5. Take both gear wheels of the pump (3) and (4) of a pump housing. |
|
|
Assembly and installation
Assembly and installation are made as it should be, the return to removal.
