90fcb7d0

12.5.4. Removal and installation of the lower steering shaft

Removal

 PERFORMANCE ORDER

1. On steering of the 1st version unhook an ear (shooter) from a blocking plate (96a), turn off a nut (96)
2. On steering of the 2nd version turn off a nut (96).

Installation

 PERFORMANCE ORDER

1. On steering of the 1st version fix new laying (96a) on the lower shaft and record it.
2. On steering of the 1st and 2nd versions at first wrap a nut (96) on the top steering shaft (70g). Establish the lower steering shaft on a nut (96) and wrap them together, continuing to rotate both parts until they are not blocked in shlitsevy connection.
3. Turn the lower steering shaft (80a) so that the fork of the hinge was established down. Insert the adjusting tool (075) into a groove of the top shaft and establish a fork of the lower shaft (80a) so that it was established in parallel to "X" to the adjusting tool (075).
4. Establish a steering wheel on a steering shaft. Tighten a nut (96).
5. On steering of the 1st version: block a nut (96) for what press laying (96a) in a groove over a nut.