90fcb7d0

12.5.11. Removal and installation of the blocking cylinder (model since 1.09.95 of the issue)

Removal and installation of the blocking cylinder (model 140 since 1.09.95 of the issue)

Removal

 PERFORMANCE ORDER

1. Remove the lock of blocking of a steering shaft, remove the protective plug (36d) from the blocking lock.
2. Press a rack (shooter) and take the lock of ignition (S2/1) with the lock of blocking of a steering shaft from the protective plug (36d). The blocking cylinder (36) can be replaced together with the protective plug (36d) and a cover (36b). On models with AT the valve of blocking of the parking (37h) settles down on the lock of ignition (S2/1) too.

Installation

 PERFORMANCE ORDER

1. Turn the blocking cylinder (36) in situation "1" by means of a key (36c) and press the new plug (36d) until the blocking doggie (36h) is not blocked in the necessary situation.
2. Take a key.
3. Install a cover (36b) on the protective plug so that the lock ring (36g) was blocked in the necessary situation.
4. Press the lock of ignition (S2/1) with a blocking shaft in the protective plug (36d) so that it was blocked in the necessary situation.