12.5.1. Removal and installation of the steering pump (model with engines 104, 119, 120 and 606)
Removal
Details of installation of the steering pump on 4-, 5-and 6-cylinder models
Details of installation of the steering pump on 8-cylinder models
The pump of the steering pump on 12-cylinder models
|
|
|
1. Extract liquid from the tank of the amplifier of steering.
2. Disconnect the intaking pipeline from the tank.
3. Pick up the giving phone, a fan casing, the ignition distributor, etc. to facilitate access to the pump, depending on engine type.
4. Take off a generator drive belt.
5. Disconnect a pulley (41) of the pump.
6. Turn off returnable (30f) and forcing (30i) pipelines.
7. Disconnect forcing (27a) and returnable (27b) pipelines from the "Tandem" pump (on models with automatic adjustment of clearance of a body).
8. Disconnect oil pipelines (27c) and (27d).
9. Disconnect the pump (30). On models with 8-cylinder engines: remove the pump with a beam, then disconnect the pump from this beam.
|
|
Installation
Installation is carried out as it should be, the return to removal.
Fill in liquid in the tank of the amplifier of steering.
