12.5.15. Removal and installation of cross steering draft
Removal
Installation
Installation is made upside-down. Do not forget to replace all самоконтрящийся fixture, and tighten new nuts with effort of 50 Nanometers.- 1. Introduction
- 2. Operation manual
- 3. Routine maintenance
- 4. Engine
- 5. Cooling systems, heating
- 6. Power supply system and release
- 7. Engine electric equipment
- 8. Gear shifting box
- 9. Automatic transmission
- 10. Coupling
- 11. Brake system
- 12. Suspension bracket and steering
- 12.1. Security measures
- 12.2. Angles of installation of wheels of the car, clearance
- 12.3. Forward suspension bracket
- 12.4. Back suspension bracket
- 12.5. Steering
- 12.5.1. Removal and installation of the steering pump (model with engines 104, 119, 120 and 606)
- 12.5.2. Dismantling and assembly of the pump of the amplifier of steering
- 12.5.3. Dismantling and assembly of an electronic and adjustable steering column
- 12.5.4. Removal and installation of the lower steering shaft
- 12.5.5. Removal and installation of the drive of telescopic adjustment of a steering column
- 12.5.6. Removal and installation of an emphasis of a pipe
- 12.5.7. Dismantling and assembly of an internal pipe
- 12.5.8. Installation of the top arm of fastening of a pipe (model to identification number 123446)
- 12.5.9. Installation of the top arm of fastening of a pipe (model from identification number 123447)
- 12.5.10. Removal and installation of the blocking cylinder (model till 31.08.95 of the issue)
- 12.5.11. Removal and installation of the blocking cylinder (model since 1.09.95 of the issue)
- 12.5.12. Contact spring
- 12.5.13. Removal and installation of average steering draft
- 12.5.14. Removal and installation of the pendular lever of the steering drive
- 12.5.15. Removal and installation of cross steering draft
- 13. Body
- 14. Onboard electric equipment
- 15. Schematic diagrams of electric equipment
