1. Remove the lock of blocking of a steering shaft, remove the protective plug (36d) from the blocking lock.
2. Press a rack (shooter) and take the lock of ignition (S2/1) with the lock of blocking of a steering shaft from the protective plug (36d). The blocking cylinder (36) can be replaced together with the protective plug (36d) and a cover (36b). On models with AT the valve of blocking of the parking (37h) settles down on the lock of ignition (S2/1) too.

1. Turn the blocking cylinder (36) in situation "1" by means of a key (36c) and press the new plug (36d) until the blocking doggie (36h) is not blocked in the necessary situation.
2. Take a key.
3. Install a cover (36b) on the protective plug so that the lock ring (36g) was blocked in the necessary situation.
4. Press the lock of ignition (S2/1) with a blocking shaft in the protective plug (36d) so that it was blocked in the necessary situation.