4.5.3. Removal and installation of a final collector
Left final collector
Removal
|
|
1. Remove the lower protective guard of the engine.
2. Pick up the cross phone between the inlet pipeline and a final collector.
3. Remove a fan casing.
4. Turn off a forward left support of the engine. |
5. Turn off самоконтрящиеся bolts (11).
|
|
6. Reduce fuel pressure by means of the special valve on the distributive highway.
7. Turn off forcing (17/3) and returnable (17/2) fuel-supply lines.
8. Raise the engine, having substituted a jack under the pallet. |
| 9. Remove a final collector (156) and replace laying. |
|
|
Installation
Installation is made as it should be, the return to removal.
Right final collector
Removal
|
|
1. Remove the lower protective guard of the engine.
2. Disconnect an exhaust pipe from a final collector. |
| 3. Turn off самоконтрящиеся bolts (11). |
|
4. Turn off a forward right support of the engine.
5. Raise the engine, having substituted a jack under the pallet.
6. Remove a final collector (156) and replace laying. |
|
Installation
Installation is made as it should be, the return to removal.
