4.5.17. Check of a condition of rods
Dimensional characteristics of rods are provided in Specifications.
Rod sizes|
|
|
- 1. Introduction
- 2. Operation manual
- 3. Routine maintenance
- 4. Engine
- 4.1. Check of a compression in engine cylinders
- 4.2. Check of the engine by means of the vacuum gage
- 4.3. Belt of the streaming drive of auxiliary units
- 4.4. 6-cylinder petrol engines (M104.944 and M104.990/994)
- 4.5. 8-cylinder petrol engines (M119.970/981 and M119.971/981)
- 4.5.1. Covers of heads of the block of cylinders - installation details
- 4.5.2. Removal and installation of the inlet pipeline
- 4.5.3. Removal and installation of a final collector
- 4.5.4. Removal and installation of heads of the block of cylinders
- 4.5.5. Removal and installation of covers of a chain of the GRM drive
- 4.5.6. Replacement of a chain of the GRM drive
- 4.5.7. Check of phases of gas distribution
- 4.5.8. The GRM drive - the general information, service of components
- 4.5.9. Removal and installation of the regulator of phases of gas distribution
- 4.5.10. Removal and installation of camshafts
- 4.5.11. Check and adjustment of control position of camshafts
- 4.5.12. Removal and installation of valves
- 4.5.13. Replacement of the directing plugs of valves
- 4.5.14. Replacement of rings of saddles of valves
- 4.5.15. Removal and installation of pistons
- 4.5.16. Designation and sizes of pistons
- 4.5.17. Check of a condition of rods
- 4.5.18. Check of a condition of a bent shaft
- 4.6. 12-cylinder petrol engines (M120.980/982)
- 4.7. 6-cylinder diesel engines (OM603.971)
- 4.8. 6-cylinder diesel engines (OM606.961)
- 5. Cooling systems, heating
- 6. Power supply system and release
- 7. Engine electric equipment
- 8. Gear shifting box
- 9. Automatic transmission
- 10. Coupling
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Onboard electric equipment
- 15. Schematic diagrams of electric equipment
