90fcb7d0

9.4.16. Removal and installation of the mechanism of blocking of transmission in situation "P"

The blocking mechanism in situation "P"

33 — the gear shifting selector Lever
33a — the Sealing ring
34 — Conic draft
35 — the Doggie
36, 60 — Bolts
50 — Draft
51 — the Directing plug
51a, 55a, 141a — Sealing rings

51b — the Directing spring
52, 56 — Lock rings
53 — a blocking Doggie in situation "P"
54 — Pruzhina
55, 141 — Fingers
139 — the Blocking doggie
140 — the Torsion spring

Removal

 PERFORMANCE ORDER

1. Remove the lever of gear shifting having turned off bolts (60).
2. Remove a doggie (35) together with conic draft (34).
3. Turn off a bolt (36).
4. Remove a finger (141).
5. Take draft (50) from the case of transmission and unhook a blocking doggie (139).
6. Remove a lock ring (52) from the directing plug (51).
7. Press a doggie (53) blocking in situation "P" opposite to a spring (54) and a vypressuyta the directing plug (51) from the transmission case.
8. Remove a lock ring (56) and a finger (55).
9. Remove a doggie (53) blocking in situation "P" with a spring (54).

Installation

 PERFORMANCE ORDER

1. Install a doggie (53) blocking in situation "P" and a spring (54) in the case of transmission and establish a finger (55) with a lock ring (56).
2. Press a blocking doggie in situation "P" (53) opposite to a spring (54) against the stop and insert the directing plug (51) into the transmission case so that teeths of a doggie (53) blocking in situation "P" were established on the middle of the directing plug.
3. Establish a lock ring (52).
4. Install draft (50) in the case of transmission and fasten a blocking doggie.
5. Establish a finger (141).
6. Tighten a bolt (36).
7. Establish a doggie (35) with conical draft (34).
8. Fix the lever of the selector of gear shifting (33).