4.7.8. Verification of the control provision of the camshaft
Install the piston of the first cylinder in the provision of VMT.
|
|
Check control position of the camshaft. Tags on the camshaft and a cover of the bearing have to be combined |
- 1. Introduction
- 2. Operation manual
- 3. Routine maintenance
- 4. Engine
- 4.1. Check of a compression in engine cylinders
- 4.2. Check of the engine by means of the vacuum gage
- 4.3. Belt of the streaming drive of auxiliary units
- 4.4. 6-cylinder petrol engines (M104.944 and M104.990/994)
- 4.5. 8-cylinder petrol engines (M119.970/981 and M119.971/981)
- 4.6. 12-cylinder petrol engines (M120.980/982)
- 4.7. 6-cylinder diesel engines (OM603.971)
- 4.7.1. The air cleaner - installation details
- 4.7.2. Replacement of a belt of the drive of the generator
- 4.7.3. Removal and installation of a natyazhitel of a belt of the drive of the generator
- 4.7.4. A final collector - installation details
- 4.7.5. GRM drive chain cover
- 4.7.6. Camshaft
- 4.7.7. Removal and installation of a head of the block of cylinders
- 4.7.8. Verification of the control provision of the camshaft
- 4.7.9. Replacement of a chain of the GRM drive
- 4.7.10. The GRM drive - the general information, service of components
- 4.7.11. Natyazhitel of a GRM drive chain - an installation detail
- 4.7.12. Removal and installation of pistons
- 4.7.13. Check of a state and replacement of rods
- 4.7.14. Measurement of diameters of cylinders
- 4.7.15. Removal and installation of sleeves of cylinders
- 4.7.16. Check of a condition of a bent shaft
- 4.7.17. Removal and installation of an asterisk of a bent shaft
- 4.7.18. Removal and installation of the pallet of a case of the engine
- 4.7.19. The oil level sensor switch - installation details
- 4.7.20. Replacement of a chain of the drive of the oil pump
- 4.7.21. Removal and installation of the oil pump
- 4.7.22. Removal and installation of the case of an oil filter
- 4.8. 6-cylinder diesel engines (OM606.961)
- 5. Cooling systems, heating
- 6. Power supply system and release
- 7. Engine electric equipment
- 8. Gear shifting box
- 9. Automatic transmission
- 10. Coupling
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Onboard electric equipment
- 15. Schematic diagrams of electric equipment
