1. Disconnect a negative wire from the battery.
2. Merge motive oil.
3. Remove a fan casing.
4. Unscrew the sensor of the speed (L3) from the pallet.
5. Disconnect the conducting socket from the sensor of level of oil (18).
6. Turn off the directing pipe of the probe of measurement of level of oil with a flange (20).
7. Disconnect oil pipelines (14) and (15).
8. Turn off nuts of fastening of the stabilizer (21d) on both sides.
9. Turn off forward support of the engine (28) and lift it by means of the elevator.
10. Remove springs of a forward suspension bracket.
11. Turn off bolts (31d) of steering.
12. Lift a forward axis by means of a jack.
13. Turn off bolts of fastening of forward axis (22).
14. Lower a forward axis.
15. Turn off bolts (19) of fastening of the pallet (45).
16. Remove the pallet (45) together with laying (45a).