1. Remove the lower protective guard of the engine.
2. Remove a radiator.
3. Remove the fan coupling.
4. Remove a pulley of a bent shaft and a nave
5. Remove the pump of the amplifier of steering or the dual pump.
6. Remove the vacuum pump.
7. Disconnect a negative wire from the battery.
8. Merge motive oil.

1. Uncover a head of the block of cylinders (125).
2. Turn off bolts of fastening of the forward fuel filter (116).
3. Turn off an arm of the directing pipe of the index of level of oil (62).
4. Turn off a bolt (417) of fastening of an arm of the generator (416) and remove it.
5. Mark installation of an arm of the BMT (42) sensor and (44) and turn off it.
6. Turn off an arm of the engine (6).
7. Turn off bolts of fastening of forward support of the engine.
8. Lift the engine the elevator.
9. Turn off bolts (51) of fastening of the pallet (45).
10. Lower the engine on support by means of the elevator.
11. Turn off bolts (66) and (67) fuel F of high pressure (FFHP).
12. Turn off bolts (115).
13. Turn off bolts of fastening of a cover of a chain of the GRM (2B) drive and remove it.