90fcb7d0

8.6.3. Removal and installation of a back cover of the transmission

Details of installation of a back cover of RKPP

Details of installation of a back cover of the transmission

50, 113b, 103a — Laying
71 — the Lever of inclusion of the 1st transfer
72, 82a, 113a — the Bolt
82 — the Back cover of the transmission

87 — the Flange
88 — the Nut
100 — the Transmission
113 — the Blocking bearing

Removal

 PERFORMANCE ORDER

1. Fix the transmission on a support.
2. Remove the blocking bearing (113).
3. Turn off a nut (88) and remove a flange (87).
4. Remove the lever of inclusion (71) of the 1st transfer.
5. Turn off a bolt (101) and remove a shaft (103).
6. Turn off bolts (82a) and uncover the transmission (82).

Installation

 PERFORMANCE ORDER

1. Replace laying (50), grease bolts (82a) with sealant 001 369 2520 (Hylomar) and tighten bolts the moment of 23 Nanometers.

2. Replace a sealing ring (103a), grease a bolt (101) with sealant 001 989 25 20 (Hylomar) and tighten its moment 5 Nanometers.

3. Replace a nut (88) and tighten its moment 160 Nanometers.

4. Further installation is carried out as it should be, the return to removal.