13.5. Removal and installation of the combined understeering switch


The combined switch


1. Disconnect a negative wire from the battery.
2. If the safety cushion is established, turn off a bolt (1) and remove a plate (2).
3. Turn off bolts (3).
4. Disconnect the socket of conducting (S4x1) from the combined switch, - for this purpose press a rack (shooter).
5. At the corresponding complete set you rastsoyedinit the socket of conducting of a tempostat (S40x1).
6. Take a pipe (4).
7. Remove the switch of a tempostat (S40) from a pipe (4).
8. Remove the combined switch (S4) from a pipe (4).


Installation is carried out as it should be, the return to removal.