13:22. Adjustment of a cowl
Details of installation of a cowl
|
|
|
1 — Loker
2 — the Nut
3 — a cowl Loop
4 — the Lock |
5 — the Buffer
6 — the radiator Panel
7 — Nizhny Novgorod the buffer
8 — the Cowl |
|
|
Places of lubricant of a cowl |
Adjustment in the longitudinal direction
|
|
| 1. Remove a loker. |
| 2. Establish a cowl in vertical position (90 °) and unhook a spring (1) from a cowl loop. |
|
| 3. Weaken nuts (4) fastenings of loops of a cowl. |
|
4. Adjust the provision of a cowl so that the first line of a forward wing coincided with a first line of a cowl. Tighten nuts of fastening of loops of a cowl.
5. Establish a loker of protection of an arch of a forward wheel. |
|
|
Adjustment in the cross direction
|
|
|
1. Weaken bolts (shooters) of fastening of the lock of a cowl (5).
|
|
| 2. Adjust installation of a cowl (5 mm). |
|
3. Tighten bolts of fastening of the lock of a cowl.
|
|
Adjustment on height
|
|
| 1. Remove a loker. |
| 2. Weaken nuts on the left and right buffers. |
|
| 3. Adjust the buffer so that the upper edge of the closed cowl was combined with the upper edge of the index of turn. |
|
| 4. Establish a cowl vertically (90 °) and unhook a spring (1) from a cowl loop. Close a cowl. |
|
| 5. Weaken both back nuts (4) fastenings of loops of a cowl. Do not weaken forward nuts not to change adjustment of a cowl in the longitudinal direction. |
|
| 6. Adjust a cowl so that the upper edge of a back part of a cowl was combined with the top part of a forward wing, then tighten nuts of fastening of loops of a cowl. Establish a cowl vertically (90 °) and fasten a spring to a cowl loop. Close a cowl. |
|
|
