13:27. Adjustment of a cover of the luggage compartment
Details of installation of a cover of the luggage compartment
|
|
|
1 — the Handle of opening of a luggage carrier
2, 3 — Bolts
4, 5 — Loops of fastening of a luggage carrier
6 — the Luggage carrier
7 — the Electrical wiring
8 — the Pneumatic pipeline |
|
Adjustment in the longitudinal direction
|
|
|
1. Weaken bolts of fastening of loops of a luggage carrier at the left and on the right.
|
|
| 2. Weaken bolts of the 10th fastening of a uvula of the 11th luggage carrier. |
|
| 3. Screw rubber buffers at the left and on the right on 1.5 turns. |
|
| 4. Adjust the provision of a luggage carrier so that the rear edge of a luggage carrier settled down aflush with a back wing. |
|
| 5. Tighten bolts of fastening of loops of a luggage carrier the moment of 10 Nanometers. |
|
| 6. Adjust a uvula (11) so that the luggage carrier was closed completely. Tighten bolts (10) of fastening of a uvula (11) the moment of 10 Nanometers. |
|
Adjustment on height
|
|
| 1. Adjust a first line of a luggage carrier on height so that the outer edge of a luggage carrier settled down aflush with a back wing. |
|
| 2. Weaken bolts (2) and (3) covers (7). |
|
| 3. Close a luggage carrier and press it so that the upper edge of a luggage carrier was established aflush with a back wing. |
|
| 4. Adjust the provision of a luggage carrier so that it was closed completely. Tighten bolts of fastening of a cover (7) the moment of 10 Nanometers. |
|
|
