4.4.14. Check of a condition of rods
Dimensional characteristics of rods and conrod bearings are provided in Specifications.
Dimensional characteristics of rods
|
|
|
|
2 — Designation |
6 — the Top insert |
- 1. Introduction
- 2. Operation manual
- 3. Routine maintenance
- 4. Engine
- 4.1. Check of a compression in engine cylinders
- 4.2. Check of the engine by means of the vacuum gage
- 4.3. Belt of the streaming drive of auxiliary units
- 4.4. 6-cylinder petrol engines (M104.944 and M104.990/994)
- 4.4.1. A cover of a head of the block of cylinders - installation details
- 4.4.2. Removal and installation of the inlet pipeline with the resonator (except the engine 104.990)
- 4.4.3. A final collector (except the engine M 104.990) - installation details
- 4.4.4. Removal and installation of a head of the block of cylinders
- 4.4.5. Removal and installation of a cover of a chain of the GRM drive
- 4.4.6. The GRM drive - the general information, service of components
- 4.4.7. An asterisk of a bent shaft - an installation detail
- 4.4.8. Removal and installation of the regulator of the camshaft
- 4.4.9. Removal and installation of camshafts
- 4.4.10. Replacement of the directing plugs of valves
- 4.4.11. Replacement of saddles of valves
- 4.4.12. Removal and installation of pistons
- 4.4.13. Replacement of piston rings
- 4.4.14. Check of a condition of rods
- 4.4.15. Check of a condition of a bent shaft
- 4.4.16. Service of the block of cylinders
- 4.4.17. Removal and installation of the pallet of a case of the engine
- 4.4.18. The oil pump - installation details
- 4.4.19. The oil level sensor switch - installation details, test data
- 4.5. 8-cylinder petrol engines (M119.970/981 and M119.971/981)
- 4.6. 12-cylinder petrol engines (M120.980/982)
- 4.7. 6-cylinder diesel engines (OM603.971)
- 4.8. 6-cylinder diesel engines (OM606.961)
- 5. Cooling systems, heating
- 6. Power supply system and release
- 7. Engine electric equipment
- 8. Gear shifting box
- 9. Automatic transmission
- 10. Coupling
- 11. Brake system
- 12. Suspension bracket and steering
- 13. Body
- 14. Onboard electric equipment
- 15. Schematic diagrams of electric equipment
