12.3.7. Removal and installation of assembly of a rotary fist

Details of installation of assembly of a rotary fist


At removal of a rotary fist the shock-absorber has to be installed!


1. Remove a nave of a forward wheel (9).
2. Remove a back protective guard (35).
3. Disconnect connecting draft (28) of the stabilizer of cross stability from a rotary fist (5).
4. Remove the sensor of the speed (L6/1) and the indicator of wear of a brake slip.
5. On models remove the sensor of acceleration of a wheel (B24/1) from ASD.
6. Disconnect steering draft (10) from a rotary fist.
7. Disconnect the lower spherical support (7) from a rotary fist (5).
8. Disconnect a rotary fist (5) from the top lever (6).
9. Remove a rotary fist (5).


Installation is carried out as it should be, the return to removal.