10.3.2. Removal, check and installation of a power shaft



1. Remove final system from flange connection.
2. On models to 05/95 at removal of the right power shaft remove a cable guide from ABS/ASR.
3. Disconnect the operating lever from the regulator of level of a body or the sensor of level of a body (model with ADS).
4. Uncover the fuel pump (petrol engines).
5. Turn off a nut of fastening of a power shaft.
6. Remove a back wheel.
7. Take power shafts from flanges of wheels.
8. Disconnect power shafts (37) from transmission flanges.


Check CV JOINTS, protective covers and covers for absence of damage and leaks.


Installation is carried out as it should be, the return to removal.