90fcb7d0

10.2. Driveshaft

Removal and installation of the driveshaft

Removal

Details of installation of the driveshaft

2 — the Driveshaft
5, 21, 200a — Bolts
6, 20, 36 — Washers
7, 35, 88, 200 — Nuts

18 — an engine Support
19 — an engine support Arm
56 — the Epiploon
87 — the Flange


 PERFORMANCE ORDER

1. Lift the transmission by means of a jack.
2. Turn off a nut of fastening of a support of the engine (35). Turn off bolts (21) with washers and remove an arm of the engine (19) together with a support (18).
3. Unscrew the driveshaft from the transmission. Turn off a bolt (8) of fastening of a shaft of a speedometer (9) and remove it.
4. Weaken adjusting plugs in Cardan's flange. For this purpose use a drift with a diameter of 10 mm and about 150 mm long.
5. Weaken a nut of the driveshaft and move the driveshaft from a flange towards a back part of the car.
6. Turn off bolts (200a).

Installation

Installation is made upside-down.