1. Remove forward wheels.
2. Disconnect a brake hose (51) from a brake tube (5) and then from a support (31).
3. Disconnect the socket of conducting (510/1x1) from the RPM meter of a forward wheel (810x1).
4. Unscrew the socket of conducting (510/1x1).
5. In case of need remove the RPM meter of a forward wheel (L6/1).

1. Vypressuyte protective covers (45).
2. Insert a metal segment (040) 28 mm thick into a support, then carefully to a vypressuyta pistons (47).
3. Remove pistons by means of flat-nose pliers (020).
4. Check pistons (47) and an opening in a support for absence of damage, in case of need make replacement.
5. Take consolidation (50) of the piston from a groove in a cylinder opening.
6. Assembly is carried out upside-down. Dimensional characteristics of components of a brake support of a forward wheel are provided in Specifications.

1. Remove a back wheel.
2. Disconnect a brake hose (51) from a brake tube (5) and then from a support (31).
3. Disconnect the socket of conducting (10/4x1) from the sensor of wear of the right brake slip (S10/4).
4. Unscrew the socket of conducting (S10/4x1).
5. Turn off a brake support (31) from stupichny assembly.