1. Lift a back part of the car.
2. Turn off on one bolt on each back wheel.
3. By means of the screw-driver (3 mm), rotate an adjusting bolt of "b" of the regulator (105) clockwise until the back wheel is not blocked.
4. Turn an adjusting bolt (b) back approximately on 5 - 5.5 turns so that the wheel could rotate freely.
5. Several times squeeze out a pedal of the drive of the parking brake.
6. Wrap bolts of fastening of wheels and lower the car.

1. Lift a back part of the car.
2. Turn off on one bolt on each back wheel.
3. By means of the screw-driver (4.5 mm), turn an adjusting castor (105) so that brake shoes blocked a wheel.
4. Turn an adjusting castor (105) back so that the wheel could rotate freely (approximately on 5-6 teeths).