2.4.2. Governing bodies and equipment of salon
The switches located on a steering column
The combined switch
Switching of the modes of functioning of headlights (passing/driving beam) and activation of indexes of turns
Switching of the modes of functioning of headlights and activation of indexes of turns|
|
|
1 — Situation "Passing beam" |
A transfer of head headlights from the mode of passing beam in the mode of driving beam is made by push-up of the lever of the understeering switch from itself, - automatically on an instrument guard the corresponding control lamp of characteristic blue light has to light up. For cutoff of driving beam return the lever to a starting position.
Also the possibility of the alarm system is provided by driving beam: the alarm system is carried out by procrastination of the lever of the understeering switch on itself and irrespective of the chosen position of the handle of the choice of the mode of functioning of external lighting fixtures.
|
|
The alarm system driving beam remains possible even at the switched-off ignition. |
Activation of indexes of turns is made by push-up of the lever of the left understeering switch in the corresponding direction (black shooters). The lever is transferred up or down, to dependences of the chosen direction of change of course.
At transfer of the lever to extreme top/lower situation (before click) the corresponding indexes of turns will continue to function until the steering wheel is not returned in rectilinear situation (the terminal switch will work), or so far the lever will not be returned in neutral situation.
Short-term inclusion of indexes, for example, at intention to replace a lane of the movement is made by easy procrastination of the lever up or down (white shooters).
Management of functioning of cleaners/washers of a windshield and lenses of headlights
|
|
The tank of the washing liquid, and also the line and nozzle of its giving are equipped with heating elements. |
Management of functioning of cleaners/washers of a windshield and lenses of head headlights
|
|
|
|
6 — the Push-button switch of supply of the washing liquid |
|
Short-term pressing the face push-button switch leads to single operation of screenwash without supply of the washing liquid.
|
|
The mode should be used only at a wet windshield. |
Utaplivaniye of the push-button switch with overcoming resistance allows to carry out the giving on a windshield of the washing liquid which is followed by operation of a screen wiper. At the activated running fires / the turned-on passing beam of headlights faroochistitel at the same time will be put in action.
Activation of the normal modes of screen wipers is made by means of the ring regulator installed in a back part of the handle of the combined switch. In situation 0 screen wipers are switched off. Transfer of the regulator to situation I leads to activation of screen wipers in the interval mode.
|
|
On the models equipped with the rain sensor, screen wipers make one wave, then the period of cycles of operation of brushes is regulated automatically. In position of the regulator II screen wipers function in the normal high-speed mode. Situation III serves for transfer of screen wipers to the mode of the accelerated functioning. |
|
|
On the models equipped with the rain sensor at a stop of the car there is an automatic switching of the period of operation of screen wipers to one step back. |
Understeering switch of management of functioning of a tempostat
The switch of management of functioning of a tempostat is located on a steering column above the combined understeering switch.The detailed description of the principles of management of functioning of a tempostat is provided in the Section of the Control system of speed (темпостат) and Speedtronic.
Button of activation of a horn
The button of inclusion of a sound signal is built in a stupichny part of a steering wheel.The switches and governing bodies located on the dashboard and forward section of the central console
|
|
Switch of the choice of the mode of functioning of external lighting/alarm fixtures |
The choice of the mode of functioning of external lighting fixtures (dimensions, passing beam) is made by means of located at the left on the dashboard of the rotary handle.
|
|
There is a possibility of the choice of one of the following modes of external lighting. |
| About |
It is switched off. |
|
|
Marker lights - join lobbies and back marker lights, lamps of illumination of registration plate. |
|
|
Passing beam - in additives to fires involved in the previous position of the handle passing beam of head headlights is turned on. |
|
|
The right parking fires - are activated the right forward and back marker lights. |
|
|
The left parking fires - are activated the left forward and back marker lights. |
|
|
The fog light - a switch handle pulling to the first emphasis leads to activation of a fog light. |
|
|
The fog light - a switch handle pulling to the second emphasis leads to additional activation of a back foggy lamp. |
The regular complete set of all models included function of the sound notification of the driver about need of shutdown of lighting before an exit from the car. The alarm buzzer works in attempt of opening of a driver's door at the switched-off ignition (a key in situation 0 or 1) in case the handle of the choice of the mode of external lighting is not transferred to situation 0 or one of parking provisions
|
|
Remember that excessively long functioning of external lighting at the killed engine is fraught with replanting of the rechargeable battery! |
Regulator of an inclination of optical axes of headlights
|
|
The wheel switch of adjustment of an inclination of optical axes of headlights is located in the left part of the dashboard and has four fixed situation (0, 1, 2 and 3) |
The switch serves for adjustment of a distance of lighting (at inclusion of passing beam), for the purpose of prevention of dazzle of drivers of passers and ahead of the going vehicles.
The regulator has to be installed in the situation (according to the tables given below) corresponding to the number of passengers and extent of loading of the car.
Models with adjustment of a road gleam
|
Position of the switch |
Number of people on front seats | Number of people on back seats |
Freight in the luggage compartment |
|
0
|
1 or 2
|
0
|
No
|
|
1
|
1
|
3
|
Full load
|
|
2
|
2
|
3
|
Full load
|
|
3
|
It is not used
|
||
Models without adjustment of a road gleam
|
Position of the switch |
Number of people on front seats | Number of people on back seats |
Freight in the luggage compartment |
|
0
|
1 or 2
|
0-3
|
Does not matter
|
|
1
|
1
|
0
|
Full load
|
|
2
|
It is not used
|
||
|
3
|
It is not used
|
||
Handle of an otpuskaniye of the parking brake
|
|
On the models considered in the present manual the foot drive of the parking brake is used. Raisings of the parking brake it is made by squeezing located at the left under the pedal dashboard. The handle of an otpuskaniye of the parking brake at the left on the car dashboard is also marked with the pictogram of the corresponding content. The pulling of the handle leads to an instant otpuskaniye of the parking brake, - the corresponding control lamp (see the Section Combination of Devices, measuring instruments and control lamps and light indicators) on an instrument guard has to go out. |
Adjustment of provision of a steering wheel
Models with the manual drive of the regulator
Models with the electric drive of the regulator
The switch of management of functioning of the electric drive of adjustment of situation the helmsman of a column is located at the left on the dashboard. The electric drive the helmsman of a column functions only at the included ignition.The chosen situation the helmsman of a column / wheel can be written down in memory of the onboard processor together with data on provisions of seats and external rear-view mirrors (see the Section Adjustment of Seats).
Switch ignition/lock of blocking of a steering column
Situation 0 - blocking of a steering column
The key can be entered into the lock or is taken from it only in this situation. At turn of the ignition key from situation 0 in situation 1 there is an unblocking of a steering column. Besides, on the models equipped with automatic transmission, an additional condition of permission of start is obligatory transfer of the lever of the selector to situation "P".The key can be taken from the ignition lock only after its turn in situation 0.
|
|
On models with AT extraction of a key from the lock of ignition becomes possible only after transfer of the lever of the selector to situation "P". |
Blocking the helmsman of a column is carried out automatically in attempt to turn a steering wheel after extraction of a key from the ignition lock.
Blocking the helmsman of a column sometimes brings impossibility to turn a key in the ignition lock. In such situation it is necessary to turn slightly a steering wheel in this or that party (for the purpose of removal of loading), at the same time turning a key in the lock.
|
|
Do not take a key from the lock from the ignition lock during the movement at all! It will inevitably lead to blocking of a steering column and loss of control over management. Take out a key from the lock only after a full stop of the car! |
|
|
At an open forward door there is a possibility of activation of electric drives of adjustment of seats, a steering column, window regulators and a cover of the top hatch at the key taken from the ignition lock. |
Situation 1 - parking
In this position of the ignition key the possibility of functioning of auxiliary consumers of the electric power (the audio system, the lighter, the heater fan, screen wipers, etc.) is provided.Situation 2 - ignition is included
The ignition key is in this situation constantly during the movement of the car, and also during the operation of the engine on single turns. On diesel models the turn of a key in situation 2 before start of the engine leads to activation of system of preheat. Electric food of all systems and the additional equipment installed on the car is at the same time provided. At turn of a key from situation 1 situation 2 quickly joins some of the control lamps located on an instrument guard of the car, confirming serviceability of functioning of the corresponding control systems (see the Section Combination of Devices, measuring instruments and control lamps and light indicators).Situation 3 - start
At turn of a key in this situation there is an inclusion of a starter. After implementation of start of the engine the key should be released, and it will automatically return to the provision of "ON".Buttons of an otpuskaniye of latches and lock of a ware box and glasses compartment
Buttons of opening and lock of covers of a ware box and glasses compartment Buttons of an otpuskaniye of castle latches of a ware box and glasses compartment are located in the central part of the dashboard, to the right of the panel of deflectors.
By means of top of two buttons it is made otpuskany latches of the lock of office for points, lower - a ware box, between buttons the cylinder of the lock of locking of both covers is located. Locking of both covers is made at the same time by turn of a key in the lock cylinder with the subsequent extraction to the right.
|
|
On the models equipped with the traveling computer not the place of office for points display assembly which folding cover rises by means of the top button is established. |
Button of an otpuskaniye of a latch of the lock of a cover of the luggage compartment
The button of a remote otpuskaniye of a latch of the lock of a cover of the luggage compartment is located in at the left in the top number of switches of the central console.|
|
For an otpuskaniye of a latch press the button, - the built-in control light-emitting diode has to be activated. |
|
|
After a latch otpuskaniye the cover of the luggage compartment leans back up in view of what it is necessary to track that there was the corresponding free space! |
Switch of shutdown of devices of protection against towage/penetration into salon / control light-emitting diode of the anticreeping alarm system
Switch of shutdown of devices of protection against unauthorized penetration into salons/towages of the car|
|
|
1 — Shutdown of the device of protection against towage |
At the corresponding complete set of the car activation of the considered devices happens automatically when locking doors/activation of the anticreeping alarm system.
|
|
Activation of sensors of volume of the device of protection against penetration into salon happens to a delay approximately in 60 seconds. |
Shutdown of the corresponding protective system is made by pressing the corresponding section of a key of the switch after extraction of a key from the ignition lock, - the built-in control light-emitting diode has to light up quickly, then go out, confirming the shutdown fact. Further locking of the car and activation of the anticreeping alarm system from the DU panel can be made (see. Uniform lock). The corresponding device remains disconnected before the next locking of the car from the DU panel.
Switch of an otpuskaniye of clamps/management of functioning of the electric drive of adjustment of provision of head restraints of a back seat
Models with manual adjustment of back head restraints
|
|
At this complete set the otpuskaniye of clamps of head restraints of a back seat is carried out remotely by means of an average in the top number of console switches of the keyboard switch. Activation of the drive can be made only at the included ignition. For an otpuskaniye of clamps press the top part of a key, then make adjustment of provision of head restraints manually (see Adjustment of seats). |
Models with the electric drive of adjustment of provision of back head restraints
Switch of management of functioning of the electric drive of adjustment of back head restraints|
|
|
1 — to Lift head restraints |
The switch of management of functioning of the electric drive of back head restraints is placed in the middle of the top number of console switches. Activation of the drive is possible only at the included ignition.
|
|
Additional switches of adjustment of height of provision of head restraints in an individual order are built in in armrests of back doors of the car, - the inclination of head restraints at the same time is established manually. |
Switch of the drive of the uniform lock / control light-emitting diode of the anticreeping alarm system
Switch of the drive of the uniform lock|
|
|
1 — Locking of locks |
The switch of the drive of the uniform lock settles down the second on the right in the top number of console switches.
Pressing the top section of the switch leads to locking of locks, on lower - to unlocking.
|
|
Shutdown of the anticreeping alarm system happens automatically when unlocking doors of the car any of regular ways (see Doors). |
Switch of the alarm system
Turning on of the alarm system is made by means of the extreme right button in the top number of console switches. The key of the switch is standardly equipped with an alarm lamp with the pictogram representing two triangles entered each other.Turning on of the alarm system leads to simultaneous operation of all four indexes of turns (and their light indicators on an instrument guard of the car). The alarm system is intended for the warning of other participants of traffic of the compelled stop of the car and is used also in other dangerous situations provided by traffic regulations.
Keys of shutdown of antiprobuksovochny (ASR) and antistrange (ESP) of systems
|
|
Keys of shutdown of the ASR and ESP functions (see the Sections Traction Control System (ASR) and Electronic Antistrange System (ESP)) are located at the left above in the section of the central console second from above, ashtrays are more left. |
The switch of the modes of the automatic damping system (ADS)
The switch is located in the right top corner of the section of the central console second from above, to the right of an ashtray and allows to carry out switching of the modes of functioning of the ADS system exercising control of rigidity of a suspension bracket.The switch of the modes of functioning of the automatic damping system of a suspension bracket (ADS)
|
|
|
|
1 — the Mode of sports driving |
|
At activation of the mode of sports driving the control light-emitting diode which is built in a switch key lights up.
Switches of the modes of heating of seats
Two keyboard switches of the modes of heating of seats are located on both sides of a forward ashtray, in bottom corners of the section of the central console second from above and allow to activate two modes of heating of seats (normal and accelerated), and also to make shutdown of heaters.Activation of heating of front seats is made provisions 1 and 2 of the ignition key, back - only in situation 2.
Switch of the modes of heating of seats
|
|
|
| 1 — Normal heating 2 — the Accelerated heating |
|
Activation of the normal mode is followed by operation of one of two control light-emitting diodes which are built in the switch. At the accelerated heating both light-emitting diodes light up.
Shutdown of heating is made as follows: if one built-in control light-emitting diode burns, it is necessary to press the top part of a key of the corresponding switch, two - on lower. Automatic shutdown of heating elements happens on a timer signal about 30 minutes of continuous functioning ТЭНов later.
|
|
Shutdown of heating of seats happens also at an overload of system of a charge or insufficient level of a charge of the rechargeable battery, - in this situation one or both control diodes (depending on the heating chosen the mode) will switch in the flashing mode. After removal of an overload (shutdown of excess consumers of the electric power) heating of seats will be activated automatically. |
Switch of management of functioning of the electric drive of external rear-view mirrors
The switch is located in the left top corner of thirds from above of section of the central console, to the left of the lever of the selector of the AT/handle of gear shifting (RKPP).Mode of adjustment of provision of an external rear-view mirror of a driver's door
|
|
|
|
|
|
Mode of folding/deployment of mirrors |
The switch has a joystick design and is equipped with the rotary handle by means of which the choice of the mirror which is subject to adjustment, and also the choice of the modes of functioning of the electric drive is carried out (adjustment/folding).
For folding of mirrors for the period of the parking or before a wash of the car it is necessary to deploy the rotary handle a nose down and to wring out the joystick down, - both mirrors will nestle on glasses of the doors. Deployment of mirrors is made by push-up of the joystick up.
|
|
In order to avoid vibration of mirrors during the movement develop them completely. |
Main switches of management of functioning of the electric drive of window regulators
Four individual switches of management of functioning of the electric drive of door window regulators are located on the central console on the right and to the left of assembly of the lever of the selector of the AT/handle of gear shifting (RKPP).Main switches of management of functioning of the electric drive of window regulators
Each switch allows to activate the drive of the regulator of a window regulator of the corresponding door. The toddler located between switches of the left doors allows to block in case of need a possibility of activation of regulators of window regulators of back doors from individual door switches by shift it to the right, - the pictogram about the image of the little man has to open.
Functioning of window regulators becomes possible only in provisions 1 or 2 of the lock of ignition, and also in situation 0 at open any of forward doors of the car.
For lowering of glass it is necessary to press the lower part of a key of the corresponding switch. A pull of glass is made when pressing the top part of a key.
The design of the drive of regulators of window regulators of forward doors allows to make also machine translation of glasses in extreme top or lower situation. For activation of function of automatic raising / lowering of glass it is necessary to drown the relevant party of the switch, having overcome resistance point, then to release a key, - glass will pass into extreme top/lower situation. The stop of the automatic drive of a window regulator can be made by repeated pressing the relevant party of a key.
|
|
At emergence of a hindrance when raising glass in the top part of its course process of the movement of the regulator stops then glass falls a little down. |
At shutdown of onboard food there is a deactivation of function of automatic raising / lowering of glasses for which restoration lift glass against the stop and continue to hold the top part of the key of the corresponding switch pressed within about 1 more second.
|
|
Closing of door glasses can be made also from the DU panel of the uniform lock (see. Uniform lock) |
Switch of the Parktronic (PTS) system
Parktronic system switch|
|
|
1 — PTS is switched off |
The keyboard switch of deactivation of PTS is located directly under the selector lever the AT/handle of gear shifting (RKPP) and equipped with the built-in control light-emitting diode which is activated at the disconnected system.
Repeated activation of PTS is made automatically when turning the ignition key in situation 2.
|
|
Connection to a turnbuckle of an electrical wiring of the trailer leads to automatic shutdown of PTS. |
Switch of management of functioning of the electric drive of a horizontal/vertical blind of back glass
The switch of management of functioning of the electric drive of a blind of back glass is located on the central console, under the selector lever with the AT/handle of gear shifting (RKPP) on the right.The drive functions only in provisions 1 or 2 of the ignition key.
Switch of management of functioning of the electric drive of a horizontal blind of back glass
|
|
|
1 — to Close |
Switch of management of functioning of the electric drive of a vertical (lifting) blind of back glass
|
|
|
1 — to Lift |
For closing of a blind it is necessary to press the top part of a key of the switch, for opening - on lower.
Traveling computer
Control panel
The control panel of the traveling computer is located on the central console of the car, directly under the selector lever with the AT/handle of gear shifting (RKPP).|
|
Control panel of the traveling computer |
Three action buttons are a part of the panel:
Display
|
|
On models without traveling computer instead of display assembly the glasses compartment is equipped. |
Display of a conclusion of data of the traveling computer
|
|
|
1 — the Button of opening of a cover |
The display of a conclusion of data is located in the central part of the dashboard, directly over assembly of deflectors of systems of ventilation/heating of salon and is equipped with a lifting cover where the glasses compartment is located on models without computer.
|
|
For opening of the screen of the display it is necessary to press the button |
|
|
Lowering of a cover of the display does not lead to suspension of functioning of the computer, - control of speed admissible limit of the movement (Limit) continues to be exercised. |
Activation of the computer happens when turning the ignition key in situation 2, - the display the message of "AB START" (Will be displayed from the moment of start) and a letter "To" memory of short distances.
Function of control of speed limit of the movement (Limit)
For input confirmation once again quickly press the button
|
|
At input of speed limit below 10 km/h operation of an alarm gong is blocked. |
Unlocking: quickly press the button
Function of monitoring of route parameters from the moment of start (
|
|
This function allows to trace such route parameters as run length from the moment of start, time in way, the average speed of the movement and average fuel consumption. |
Activation of the mode is made by means of the button
For dumping of data it is necessary to press the button "
|
|
If after a car stop the key is again inserted into the lock of a shaft of a steering wheel and turns in situation 2 memory of short distances is dumped, - on the display the message of "AB START" and a letter will blink "To". Data of monitoring of the last trip remain until the inscription "AB START" and a letter continue to blink "To" (throughout no more than 2 km). For this purpose quickly press the button |
Function of calculation of parameters of a route of the set length (Ziel)
|
|
This function allows to trace such route parameters as distance to the chosen purpose (it is entered by the user), estimated time of arrival, a stock of the course and average fuel consumption. |
Calculation of parameters can be made in two independent modes: mode of short distances (K) and mode of long distances (L). Switching of the modes is made by means of the K/L button, - in the left corner of the screen of the display the corresponding letter is highlighted.
Further by means of digital buttons enter value of length of a route which parameters will be traced by the computer. For input confirmation once again quickly press the button
|
|
Dumping of data on average fuel consumption is possible in the Start mode. |
At installation of time of the devices of hours which are built in in a combination (see the Section Combination of Devices, measuring instruments and control lamps and light indicators) the current time is automatically displayed on the display. Hours are used for calculation of arrival time. For switching off of indication of indications of hours press any of action buttons (
Individual switches of management of functioning of the electric drive of window regulators of back doors
Keyboard switches are built in in armrests of back doors. The principle of their action is similar described above for the corresponding main switches (see the Combination of devices, measuring instruments and control lamps and light indicators).Protection of rear-view mirrors against dazzle of the driver the reflected light
External rear-view mirror of a driver's door with automatic protection against dazzle
Protection is activated automatically at turn of a key in the ignition lock in situation 2, - the mirror switches in the corresponding mode depending on a hade of rays of light to its reflecting surface.|
|
Activation of protective switching will happen only in case light freely gets on the sensors which are built in in a mirror. This condition can not be satisfied at towage of the trailer or closing of a blind of back glass. |
|
|
At turning on of the reverse gear, and also at activation of illumination of salon protection of a mirror against dazzle is blocked. |
Switching of the modes of a saloon rear-view mirror
Mirror with manual switching
Mirror with automatic protection
The principle of functioning of automatic protection of a saloon mirror is similar described above for an external mirror of a driver's door.Ashtrays and lighters
Assemblies of ashtrays with lighters are built in in forward section of the central console and in the panel of an upholstery of back doors of the car and have almost identical design.For an ashtray/lighter vydviganiye from the console panel / panel of an upholstery of a door it is necessary to press the upper edge of its cover, - at a cover otpuskaniye assembly will automatically move forward from the panel.
|
|
Extraction of a reception element of an ashtray is made for a clearing by push-up of a lock uvula, - having released thus a clamp, take an element, having pulled it up. |
|
|
On models of the corresponding complete set before extraction of a reception element of a console ashtray transfer the AT selector lever to situation "N". |
Use of lighters is possible only in provisions 1 or 2 of the ignition key.
For activation of the lighter just drown its button in a reception nest against the stop, - after warming up of a heating element the button will automatically jump out in a starting position.
|
|
Do not hold the lighter button in the pressed situation by force at all! If the lighter button after pressing does not jump out after more than 30 seconds, the car should be driven away on car repair shop for elimination of the malfunction taking place. After use do not forget to return the button in a nest (in order to avoid a contamination of the last). |
The reception nest of the lighter can be used for connection of the external consumers of the electric power (the pump, the charger for a radio telephone, the vacuum cleaner) calculated on food in 12 V and with a power of consumption no more than 120 W.
Illumination of salon
Main saloon lamps and forward mate lamps
Main control panel of functioning of saloon lamps / electric drive of the top hatchThe main control panel of functioning of saloon lamps / the electric drive of the top hatch is built in in assembly of the ceiling console of the car.
By means of an average from three keyboard switches
|
|
If when unlocking the car outside any of doors does not open, activation of lamps is made with some temporary delay. |
The forward switch
The back switch
|
|
Shutdown of back saloon lamps is not represented possible if any of back doors it is open. |
By means of two side switches
The back directed lamps (lamps for reading)
Activation of the back directed lamps (lamps) is made for reading by means of the built-in push-button switches. For shutdown of the lamp it is necessary to press the button repeatedly.Lamps of illumination of thresholds when opening doors
Activation of lamps is made automatically from contact switches.Management of functioning of the electric drive of a cover of the top hatch
Principle of functioning of the switch of management of functioning of the electric drive of the top hatch
|
|
|
|
1 — to Shift |
|
The switch of management of functioning of the electric drive of a lifting and movable cover of the top hatch is on the ceiling console.
The electric drive of a cover of the hatch functions only in provisions 1 or 2 of the ignition key, and also in situation 0 at open any of forward doors of the car.
|
|
The glass cover of the hatch is equipped with a sun-protection blind opening and which closing is made manually. |
|
|
When moving a cover of the hatch in open situation the blind also moves. |
Sun-protection peaks
|
|
Sun-protection peaks provide protection of eyes of the driver / the forward passenger from dazzle by direct sunshine both in front, and sideways. |
Back toilet pocket mirror
|
|
The back toilet pocket mirror is built in in a ceiling upholstery of salon. For lowering of a pocket mirror slightly press its cover. |
Ware boxes
The main ware box is equipped in the right part of the dashboard and equipped with the lock. Otpuskany latches of the lock it can be made by means of the special button located directly under the lock cylinder to the right of deflectors of the central air ducts of the dashboard.The office for storage of points is located on the models which are not equipped with the traveling computer directly over the central deflectors of the dashboard.
|
|
The display of a conclusion of data is located on models with the traveling computer here. The cover of office is locked by the same lock, as the ware box, an otpuskaniye of a latch of the lock can be made by means of the button located directly over the lock cylinder. |
Console ware box
|
|
|
| 6 — to Open 7 — to Close |
|
One more ware box can be equipped in assembly of the central console, under an armrest between front seats of the car, - lift an armrest, then open a movable cover of a box.
Console armrest with office under storage of the mobile phone and the folding panel of coasters
On some models instead of a console box are equipped the office equipped with a cover under storages of the mobile phone and the folding panel with coasters, - in the put state assembly forms an armrest.
Back ware boxes
|
|
|
6 — to Open |
Boxes of a similar design (with a movable cover) are provided also in a back part of salon.
First-aid kit
Back ware boxes
|
|
|
|
1 — Deepening for a cover poddevaniye |
|
The regular first-aid kit is equipped in the back shelf of salon and equipped with a folding cover. For opening of a cover hook it for specially provided deepening. Periodically check completeness of contents of the first-aid kit.
Fire extinguisher
The regular place for fastening of the fire extinguisher is equipped from the forward party of a pillow of a driver's seat. after each use the fire extinguisher is subject to gas station. Check of the fire extinguisher has to be made each 1-2 years.Removal and installation of head restraints of front seats
For extraction of the head restraint lifted in extreme top situation it is necessary to press the button otpuskaniye of a clamp (1).
|
|
|
|
1 — the clamp otpuskaniye Button |
|
Differential of removal of head restraints with manual adjustment it is necessary to rotate the extended handle of the mechanical drive (see the Section Adjustment of Seats) until the head restraint does not fall into an extreme top state, then to remove it manually, previously having pressed clamp otpuskaniye the button.
On models with the electric drive the procedure is similar with only that difference that a transfer of a head restraint to the top situation is made by means of the corresponding door switch (see the Section Adjustment of Seats).
Installation is made upside-down.
Removal and installation of a pillow of a many-placed back seat
|
|
Wring out outside located in it is deaf bottom edge of a pillow lock rychazhka, then lift a first line of a pillow. |
At installation of a pillow track that its rear edge was pushed under a back against the stop. Having pressed a first line, latch clamps.
Transportation of skis
Transportation of skis in interior of the car
|
|
The protective cover is calculated on one couple of skis. |
On some models the window of direct access to the luggage compartment equipped with a cover is provided in a back of a many-placed back seat that allows to transport freely in interior of the car such lengthy sports equipment as skis, etc.
|
|
Lower a back armrest and a folding cover. |
|
|
From the luggage compartment lift an access hatch cover the cover is kept in the lifted situation by two magnets. |
|
|
Fill skis in a cover and belts attach the last to an armrest of a back seat. |
|
|
Having fitted a belt, latch a safety carbine in a special loop. |
Folding of a cover is made upside-down, - do not forget to close an access hatch cover in the luggage compartment.
Removal and installation of assembly of a cover for skis
Transportation of skis on a car roof
For transportation of skis on a roof of the car the regular top luggage carrier or the special holder for skis of a company design Mercedes-Benz can be used.|
|
Fix the luggage carrier/holder only in regular points of fastening, strictly adhere to instructions of manufacturer. |